Detailed Product Description

ZC hydraulic pressure experiment machine

-

This machine consists of front pressure head and back pressure head, main hydraulic pressure cylinder, pulling pole and top transom. Four pulling poles connect the back pressure head and main hydraulic pressure cylinder together, which could be used for hydraulic pressure experiment. U-model flashboard orientation device could adapt the back pressure head to the experiment of different length steel tube. Upper frame assumes to be up-vaulted, pull up two pulling poles and prevents the pulling pole bending badly and could be the install base for steel tube enclasping setting. Every pulling pole consists of four segments, which is connected with zigzag screw thread. With the impulse of piston cylinder, U-model flashboard will set back pressure head orientated as inserted to block loop of pulling pole. When we test the pressure, one side is hydraulic pressure while the other side is the oil pressure of main cylinder. As the hydraulic pressure is ascended, then the oil pressure will raise up. As the homeostasis achieved about hydraulic pressure and oil pressure, front pressure head is almost stable. After the pressure keep balance some time, the experiment will end up.

Main Technical Data